Traynor K4 Keyboard Amp

Traynor K4 Keyboard Amp


Product Description

The K4 amplifier is an advanced and extremely versatile stereo keyboard amp that delivers a wide spectrum of tones. More importantly, it has the ability to sound right with a minimum amount of tweaking. The Traynor K4 consists of three separate, built-in amplifiers, for true stereo operation with a mono-summed woofer. A 200-watt Low Frequency amplifier drives a 12-inch, 200-watt woofer, while a pair of 50 watt amps drive the left and right channels, delivering the mid and high frequencies through a set of 4.5-inch, 30-watt midrange drivers and a pair of 20-watt 2.5-inch compression drivers with horns.One unique feature of the K4 amp is how Channel 1 utilizes a pair of 12AX7 tubes, one for each channel, left and right. These preamp tubes supply warmth and smooth out the harsh harmonic overtones often associated with many modern Digital keyboards. It also excels at maintaining the warmth and character of vintage synthesizers and organs where it isn't always practical to use the much larger powered speaker cabinets they are typically associated with.There is also a select switch to toggle between using either the tube or a Solid-State signal path, bypassing the tube on the input altogether, for those times when the cleanest signal path possible is preferred. Channel one also features a foot switchable Tube Overdrive control, for those who like to add a small amount of grit to their playing. Depending on the level, a small amount of warmth right up to full grit can be had from the Tube Overdrive. Natural tube compression is a very desired tone as the subtle dynamics can't be properly emulated by most of today's digital workstations. Use this feature to add some grit to an otherwise sterile keyboard tone to make it a truly vintage, tube-based one. A single button latching footswitch, like the AFS-1 can be used to engage the Lead/Overdrive feature. If a footswitch is connected, it will disable the front panel switch. Additional tonal control can be had thanks to the three



  • Front PanelA Master Volume control is located on the front panel along with the Power switch and LED.Front panel controls for Channel 1 include: Two parallel pairs of balanced 1/4-inch TRS inputs for mono or stereo operationGain, Bass, Mid, Treble controls with a boost/cut of 15dbA five position voicing selector (Bypass, Studio, Live, Piano, Organ)Tube/Solid State input switchLead Level controlOverdrive Trim controlLead Bypass switchInput clip LEDFront panel controls for Channel 2 include: Paral






disclaimer

Categories:

Leave a Reply